Module Title: 5EJ539 Electronic Systems (Mode B)
Title: Electronic Systems Design

Fig 1 Fig2
Topic 1. Design and build of simple Op-amp circuits practically and using multisim
- Design and Built of simple Op-amp circuits practically and use Multisim
Vout= Avol (Vin+ − Vin-)
Vout=200,000×(0.5V−0.3V)
Vout=40,000V
Vout=13.5 V, due to clipping
The op-amp cannot produce 20,000 V. The datasheet lists a maximum output swing
of only ±13.5 V when using ±15 V supplies. The output will be truncated at 13.5 V.
If the input signal is reduced to only 1 mV, the output will still be clipped at 13.5 V.
This holds true even if we apply a signal to the inverting input, as in Figure 1.
Computer Simulation
A simulation of Figure 1 using Multisim is shown in Figure 2 T……………………………………………………………….