4EJ522 Engineering Wokshop CW1

 

4EJ522 CW1 Engineering Workshop

 

Portfolio of work demonstrating craft skills

 

 

 

 

Course Work 1: Portfolio of work demonstrating craft skills, including wiring, soldering, and working with plastic or metal sheet or enclosures.

Although welding and soldering can look similar, they do completely different things. Top: This welded joint mechanically fixes two pieces of metal together in an upside-down T-shape.

Soldering is a joining process used to join different types of metals together by melting solder. Solder is a metal alloy usually made of tin and lead which is melted.

 

 

Types of Soldering

There are three types of soldering that use increasingly higher temperatures, which in turn produce progressively stronger joints:

  • Soft soldering (90 °C – 450 °C) – This process has the lowest filler metal melting point of all the soldering types at less than around 400°C these filler metals are usually alloys, often containing lead with liquidus temperatures under 350°C. Because of the low temperatures used in soft soldering, it thermally stresses components the least but does not make strong joints and is then therefore unsuitable for mechanical load-bearing applications. It is also not suited for high-temperature use as this type of solder loses strength and melts.
  • Hard (silver) soldering (>450 °C) – Brass or silver is the bonding metal used in this process and requires a blowtorch to achieve the temperatures at which the solder metals.
  • Brazing (>450 °C) – This type of soldering uses metal with a much higher melting point than those used in hard and soft soldering. However, similarly to hard soldering, the metal being bonded is heated as opposed to being melted. Once both the materials are heated sufficiently, you can then place the soldering metal between them which melts and acts as a bonding agent.