Abstract
Fibre-reinforced polymer (FRP) composites have extensive applications in various fields such as the aerospace and automotive engineering industries. In recent years, there have been more novel applications for FRP in the construction industry. FRP is known for its beneficial properties such as high strength to weight ratio, lower specific weight, excellent corrosion, and fatigue resistance. These advantages have made FRP more desirable to be used as an alternative to steel reinforcement for internal and external reinforcement in structural concrete, especially those exposed to extreme environments.
One of the objectives of this research is to identify all the different types of fibre reinforced polymer such as CFRP, GFRP and BFRP. These all can be used as an alternative to conventional steel reinforcement in structural concrete. Their physical and mechanical properties such as tensile strength, modulus of elasticity, ultimate strain, durability in alkaline environments, fatigue strength, and bond strength have been identified for each type.
This thesis also presents experimental, analytical and numerical modelling investigations of the performance and behaviour of concrete members reinforced with basalt fibre reinforced polymer (BFRP). The primary objective of this research is to address the applicability of this material as internal reinforcement and to investigate the applicability of current FRP design guides on BFRP as internal reinforcement to structural concrete members.
For the flexure investigation of BFRP reinforced concrete sections, four beams were studied, two of them being BFRP reinforced beams and two of them being conventional steel reinforced beams that have been used as control beams. The outcome of this has shown us different types of FRP bars that can replace the traditional steel reinforcement in concrete structures. Also it provides us with detailed knowledge of the behaviour of materials such as BFRP bars. Moreover, it determines the applicability of current FRP design guidelines on BFRP reinforcements.
INTRODUCTION
Structural concrete is usually reinforced with conventional steel bars, which can last for decades without exhibiting any deterioration if it is properly protected from corrosion attack. However this is not possible in so many cases, such as structures that are exposed to extreme environments such as de-icing salts in bridge, marine structures, parking structures, bridge decks, highway under extreme environments, etc. The combination of moisture contaminated with chlorides and temperature will accelerate the corrosion of steel reinforcement and lead to the deterioration of the structure and eventual loss of serviceability.
The corrosion of steel reinforcement in concrete structures is the main factor in reducing the lifespan of these structures. The repair and retrofitting of these structures may cost as much as twice its original cost. In general, it has been estimated that approximately 15% of all bridges are deficient structurally, mainly due to the corrosion of the steel reinforcement. The annual direct cost for repairing these structures are estimated to reach £8.3 billion in the United States alone [1]. In Canada, the cost of repairing steel reinforced concrete structures is estimated to be around £74 billion [2]. In Europe it has been estimated that the cost of steel corrosion is around £3 billion a year [3]. In India the annual cost of corrosion is around $30 billion. While in the UK it is estimated that over £300 million is spent annually to repair and rehabilitate the existing infrastructure [4].
To overcome the corrosion problems and increase the lifespan of reinforced concrete structures a variety of techniques are used worldwide, such as protective coatings and linings, metallic coating and claddings, corrosion resistance alloys, corrosion inhibitors, cathodic and anodic protection, using stainless steel bars and corrosion resistance composites [5]. However, most of these solutions have either had failures or are expensive. One of the preferred solutions in many countries is the use of fiber reinforced polymer (FRP) rebar as an internal reinforcement for concrete structures.
Fiber reinforced polymer (FRP) rebar is not metallic and so is not susceptible to corrosion and it is impervious to attack by chlorides. FRP rebar will eliminate the durability problems seen with steel reinforcement and increase the service life of the structure. Moreover, FRP rebar has a high tensile strength to weight ratio which makes it more cost effective that using conventional steel rebar.
FRP composite materials are typically made of fibres and resins. The most common fibres are carbon, glass, aramid and the most recently developed fibres are basalt fibres. The most common type of resins are epoxy, vinylesters, polyesters or phenolic thermosetting resins that have fibres fractions greater than 30% [6].
VIEW FULL ASSIGNMENT
To view and download the full assignment, purchase the assignment below: